Intel SOCKET 370 CELERON TS-ASP3 Manual de usuario descargar pdf (Pagina 46)

3.8 PnP/PCI Configuration Setup

Primary IDE 0

Primary IDE 1

Secondary IDE 0

Secondary IDE 1

FDD, COM, LPT Port

PCI PIRQ[A-D]#

The settings in these fields enable or disable the detection of

IDE, floppy, serial and parallel port activities for powering down

state transition. Actually, it detects read/write to/from I/O ports.

• Reset Configuration Data

Normally, you leave this field “Disabled”. Select “Enabled” to reset Extended System

Configuration Data (ESCD) if you have just installed a new add-on card and the system

reconfiguration has caused such a serious conflict that the operating system cannot boot.

The setting will automatically be set back to “Disabled” the next time the system reboots.

• Resources Controlled by

The Award Plug-and-Play BIOS can automatically configure all the boot and Plug-and-Play

(PnP) compatible devices. If you select “Auto”, all of the Interrupt Requests (IRQs) and DMA

assignment fields will be activated as the BIOS automatically assigns them. The choices

are: “Auto” and “Manual”.

42 BIOS SETUP

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 60 61

Sin comentarios

Intel SOCKET 370 CELERON TS-ASP3 Manual de usuario Pagina 46