Intel Computer Hardware 05-2065-003 Manual de usuario Pagina 17

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 50
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 16
IP Media Server (Global Call) Demo Guide — August 2005 17
Preparing to Run the Demo
Sample Configuration File
################################################################################################
# IP Protocol :
# The IP Protocol used for opening the IP Line devices, values: H323, SIP, both
#
# DTMFmode
# possible options:
# OutOfBand, inband, rfc2833
#
# Capability posiblities:
# g711Alaw
# g711Mulaw
# gsm
# gsmEFR
# g723_5_3k
# g723_6_3k
# g729a
# g729ab
# t38UDPFax
#
# Note: if you want to run the demo with coder g729 use:
# g729a for running with VAD disable
# and 729ab for running with VAD enable
#
# Caution:
# If capability is g711Alaw /Mulaw ==> FramesPerPkt = 10,20,30.
# G711 frame per packet defines the packet size in
# milliseconds
# If capability is g723_5_3k / 6_3k ==> FramesPerPkt = 1, 2, 3 .
# FrameSize isn't needed, default= 30ms.
# If capability is gsm ==> FramesPerPkt = 1, 2, 3 .
# FrameSize isn't needed, default= 20ms.
# If capability is gsmEFR ==> FramesPerPkt = 1, 2, 3 .
# FrameSize isn't needed, default= 20ms.
# If capability is g729a ==> FramesPerPkt = 3, 4 .
# FrameSize isn't needed, default= 10ms.
# VAD disable, the VAD parameter is ignored
# If capability is g729ab ==>FramesPerPkt = 3, 4 .
# FrameSize isn't needed, default= 10ms.
# VAD enable, the VAD parameter is ignored
#
################################################################################################
ipProtocolName = H323
DTMFmode = inBand
Channel = 1-120
{
Capability
{
# TxType = g711Alaw
# TxFramesPerPkt = 30
Table 2. Quality of Service Parameter Defaults for IPT Series Boards
QoS Type
Fault
Threshold
1
Time
Interval (ms)
Debounce
On (ms)
Debounce
Off (ms)
% Success
Threshold
% Fail
Threshold
Jitter 30 (ms) 0 (n/a) 0 (n/a) 0 (n/a) 0 (n/a) 0 (n/a)
Lost Packets 100 (%) 0 (n/a) 0 (n/a) 0 (n/a) 0 (n/a) 0 (n/a)
Notes:
1. Units for Fault Threshold are different for different QoS Types. See unit indications in table cells.
Vista de pagina 16
1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 49 50

Comentarios a estos manuales

Sin comentarios