Intel SC5299UPNA Ficha de datos descargar pdf (Pagina 122)

Intel

Entry Server Chassis SC5299-E TPS Peripheral and Hard Drive Support

Revision 3.1

Intel order number D37594-005

107

4. Peripheral and Hard Drive Support

TP02032

A. Hard Disk Drive Bay

Figure 22. Drive Bay Locations for Intel

Entry Server Chassis SC5299-E (DP/WS/BRP

configuration shown)

4.1 3.5-in Peripheral Drive Bay

The Intel

Entry Server Chassis SC5299-E supports one 3.5-in removable media peripheral,

such as a floppy or tape drive, below the 5.25-in peripheral bays. The bezel must be removed

prior to 3.5-in removable media installation. When a drive is not installed, a snap-in EMI shield

must be in place to ensure regulatory compliance. A cosmetic plastic filler is provided to snap

into the bezel.

The 3.5-in bay is designed for tool-less insertion and removal so that no screws are required.

On the right side of the chassis, two protrusions in the sheet metal help locate the drive. On the

left side are two levers to lock the drive into place.

4.2 5.25-in Peripheral Drive Bays

The Intel

Entry Server Chassis SC5299-E supports two half-height 5.25-in removable media

peripheral devices, such as a magnetic/optical disk, CD-ROM drive, or tape drive. These

peripherals can be up to 9 inches (228.6 mm) deep on the non-redundant power chassis. The

650-W redundant power supply is longer in length and will limit the drives to approximately 7.5-

in maximum length. As a guideline, the maximum recommended power per device is 17W.

1 2 ... 117 118 119 120 121 122 123 124 125 126 127 ... 153 154

Sin comentarios

Intel SC5299UPNA Ficha de datos Pagina 122