Intel SR1520ML Manual de usuario descargar pdf (Pagina 32)

12 Intel

Server System SR1520ML User’s Guide

Processor

Each server board must have one processor installed. Each board can use a different

processor. For a list of supported processors, see http://support.intel/com/support/

motherboards/server/X38ML.

Memory

Each server supports four DDR2 667 / 800 MHz unbuffered ECC DIMMs. The maximum

memory capacity is 2 GB unbuffered, 1 Gbit DDR2 memory. The minimum is one 256-

MB DIMM. The four slots are partitioned into Channel A and Channel B. Channel A

consists of DIMM A1 and DIMM A2. Channel Bconsists of DIMM B1 and DIMM B2.

DIMM A1 is the closest to the MCH.

DIMMs must meet the following requirements:

• If dual-channel operation is desired, Channel A and Channel B must be populated

identically (i.e., same capacity)

• Use DDR2 667 / 800 only.

• The speed used on all the channels is the slowest DIMM in the system

• Use ECC or non-ECC DIMMs

• You can mix different memory technologies (size and density)

• For single-channel mode, either channel may be used and DIMM sockets within the

same channel can be populated in any order

• For dual-channel interleaved mode, DIMM sockets may be populated in any order

as long as the total memory in each channel is the same.

• For dual-channel asymmetric mode, DIMM sockets may be populated in any order.

For a complete list of supported memory DIMMs, see http://support.intel/com/support/

motherboards/server/X38ML.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 155 156

Sin comentarios

Intel SR1520ML Manual de usuario Pagina 32